Generator Field Support Platform

Mechanical Dynamics & Analysis (MD&A) experts have constructed a generator field support platform to allow for removal of the field when performing a 7FH2 Generator Major Inspection. Rotor field inspections can either be performed on-site or in a shop environment.  Repairs generally require the rotor field to be transported to a qualified repair facility.  MD&A […]

Read More

Electric Generators 2018 Annual Review

Read Electric GENERATORS 2018 Annual Review, a special report by CCJ.  It is complied from presentations made at the third GUG (Generator Users Group) conference from last August.  Electric Generators Review (PDF) MD&A is an exclusive sponsor and can meet all your generator needs! See you at 2018 GUG conference where our experts are presenting again! […]

Read More

In-Place Stationary Shaft Machining Capabilities

MD&A continues to enhance our “one-stop shop” capabilities for customers, most recently through the addition of in-place stationary shaft machining. In-place stationary shaft machining allows MD&A to repair damaged journals, collector rings, and seal areas without removing turbine and generator rotors from the unit. The compact setup easily fits under LP hood radii to allow […]

Read More

Investing in Journal Bearing Ball Ring Repairs

MD&A continues to invest in new facilities that enable us to expand our quality service and repair offerings. For example, our Bearings, Seals and Hydraulics division recently acquired a new horizontal bore machine at its Euclid, OH plant to enable delivery of precision ball ring repairs on journal bearings.  The horizontal bore machine, shown in […]

Read More

Emergent Generator Re-wedge

Mechanical Dynamics & Analysis (MD&A) performed an emergent generator rewedge for a 260 MW Alstom® generator on-site in Mexico. The original work scope involved electrical testing of the generator rotor and stator, along with the removal of the retaining rings to inspect the insulation and blocking under the rings. Upon inspection of the stator, greasing […]

Read More

Horizontal Mounted Actuator Upgrade for Toshiba® Units

MD&A performs repairs on hydraulic systems on all major turbine makes. We’ve built a solid reputation on governor stand repair, and now are forging an equally well-deserved reputation with actuator repairs.  Our experts designed a horizontal mounted actuator upgrade. At our 100,000-square-foot facility in Euclid, Ohio, we stock a large number of components, everything from MHC governor […]

Read More

Frame 5 Gas Turbine Rotor Repair

Mechanical Dynamics & Analysis (MD&A) repaired a Frame 5 gas turbine rotor at our Gas Turbine Repair Center located in Houston TX.  MD&A replaced 1st and 2nd stage buckets, repaired the seal area on the row 1 turbine wheel, performed compressor blade blending, and machined the thrust collar to accommodate the newer style thrust bearing at […]

Read More

Rexroth® Actuator Rebuild

MD&A’s Bearings, Seals & Hydraulics division provides complete refurbishment of Rexroth® hydraulic actuators for power plants owners. As suggested, be sure to inspect your Rexroth® actuators every five (5) years. We maintain a large inventory of Rexroth® hydraulic servos, solenoids, rebuild kits and disc springs to satisfy short-cycle turnaround requirements. To date, MD&A has inspected […]

Read More

Co-Gen Turbine Controls Retrofit

Mechanical Dynamics & Analysis’ Control Systems Division (MD&A Control Systems) replaced an industrial co-gen turbine’s original mechanical-hydraulic (MHC) controls with an electronic governor, electro-hydraulic trip system and self-contained control valve actuator. The primary drivers for the project were the operator’s desire to increase the long-term maintainability and reliability by replacing the MHC components that had […]

Read More